Hague K2 Junior DSLR Camera Jib
- 2kg Counterbalance weight
- Camera Mounting L-Plate
- Control Cable
- Counterbalance Arm
- Fine Trim Weight
- Monitor Bracket
- Tilt & Camera Pulley
- Tilt Handle
- Carry Bag
The camera attaches directly to the jib arm's camera plate and is secured with the thumb screw supplied. There is an attachable counterbalance arm, with adjustable fine trim weight, and you just need to add standard bar weights (not supplied) to the weight plate at the back to counterbalance.
The jib has a variable tilt control with lock, which enables you to tilt the camera 90 degrees and the camera can be set in any position, so you can have the camera pointing directly downwards or upwards creating some very unusual shots.
The new design has a much greater vertical crane movement, which means the camera can go from ground level to over 7ft.6" (2.3m) high and you can pan the jib arm 360 degrees. There is also a jib lock, should you require to leave the camera at a set height.
The K2 Junior Jib attaches directly to the tripod camera plate and can be secured with both the standard 1/4" and 3/8" screws that come supplied with tripod plates.
The Hague Junior Jib can be set up with the camera mounted on either side for left or right hand control and this is also helpful if using a camera with a flip out screen. The user can then monitor the shots either via the camera screen or from an external monitor or tablet with mounting brackets available as optional extras for both scenarios.
Supports up to 3kg.
Vertical crane movement 2.3m.
Pan Radius 126cm.
Transit Size 144cm x 15cm x 12cm.
Weight 3.5kg.
Fits to any sturdy tripod.